 |
|
 |
Tile Tips
by
Jeff J. Brekhus
Brekhus Tile & Stone, Inc.
COMMON BUYING MISTAKES
Select the correct tile for the job!
Looks aren’t the only consideration. Select a floor tile that will
withstand usage germane to the location. Wall tile. Countertops require
tile with greater strength and stronger glazes to withstand food stains
and acids.
Floors require more strength and stronger glazes to withstand grit on
the bottom of shoes women in high heel shoes (a 125# woman in high heels
exerts 500#/square inch pressure on a floor, much more than a refrigerator!).
Interior bathroom floors can use smaller wall tiles as your carpets will
clean your shoes of outside grit before they get to the tile. However
smaller tile will make small rooms look small and result in much more
grout to maintain.
We find that larger floor tiles (16x16 up to 20x20) are well suited
for not only floors but countertops, shower walls and ceilings! The
larger sizes allow you to obtain drastically more tile at greater strength
with dramatically lesser number of grout lines. Less grout lines means
a less busy pattern which will make the floor, countertop and/or wall
look bigger and also will give you less grout to maintain!
MAKING THE MOST OF YOUR BUDGET
Buy from a retailer that you trust. Tile is a “blind” item
- just like
diamonds, you can’t tell quality by looking at it! Work with a
retailer
who knows tile, shows it well it his store, has many samples to select
from and represents different brands so you can mix and match and
therefore get more value for your money.
You must take samples
home or to the job site. The retail store is not the place to make your
selection. You need to have a number of different sizes, colors and
textures to select from in order to make a good decision. Just as you
wouldn’t want your eyes to be tested with only one lens, you need
to
see a variety of tiles in the setting where they will be installed to
determine your best choice. Often the first choice in our shop is the
third choice when you get it home! We recommend two trips. In the
first visit 5-6 tiles that are truly different
from each other should be checked out so that a valid “better-worse” situation
is created at the job
site. On the second trip another 4-5 samples should be selected
based on the tiles that looked the best in the first visit. Much like
eating an elephant, a slow methodical approach is best !
Watch out for “do-it-yourself” stores where their only
goal is to sell as
much tile as quickly as possible or where the only person to help you
is the plumbing department guy who was the paint guy yesterday. Cheap
price can mean cheap quality. There truly is “no free lunch.”
A
poorly designed layout with the wrong quality and size of tile can
quickly result in you paying too much and getting less than you would
if you were dealing with a retailer who knows tile and its application.
You want to deal with someone who is interested in your continued use
of tile for this and many future projects. Someone who is interested
in your experience and how it reflects on his relationship with you and
your friends and neighbors for many years to come.
INSTALLATION
Tile doesn’t jut get slapped down- it needs to be installed.
Floors, walls and countertops need to be prepared before the tile can
be installed. It is exacting work and if you are going to do it yourself,
you should start with a small project first to see how you like it and
how it turns out in not only your but the “boss’s” eyes.
If you are going to do-it-yourself, make sure that you are dealing
with an establishment that can and will provide assistance to the do-it-yourselfer.
Setting tile is not brain surgery but particularly for the first
timer it sure helps to know someone who has done it before and is
willing to give free advice and counsel.
We offer all of our customers
computer generated drawings to assist in selection and layout of the
tile. If you are going to use a professional installer, ask to see
pictures of his work and if you feel a need, ask to visit a few jobsite
to
see how his work looks to you and how happy the homeowner is with
the final job. Find out if the installer is insured and if he is affiliated
with a company or works out of the back of his truck and might be in
Florida or California next winter when you have a problem!
Working
through a contractor as opposed to direct to the installer means that,
as insurance, you will have someone on your side to protect the long
term reputation of a business in resolving disputes. You should also
then be dealing with a company who is a member of the Better
Business Bureau and organizations like NARI who have ways to
resolve difficulties if they arise. If you deal direct you will be in
conflict
with the very person who will have to come back into your house and
readdress the problem!
CARING FOR TILE
Tile is easy to clean, but how often do you clean?!
If you are prepared to damp mop daily, then a high shine solid color
will work foryou.
If you are not prepared for daily maintenance or you are troubled by
floors that look dirty and demand attention you might not want solid
colored floors. I recommend that clients who want a white floor put an
old white sheet on the floor for a few days and see what the sheet does
for the room and it maintenance requirements!
A floor and indeed, countertop and shower walls, will require
much less maintenance if the tile used is large, has a rustic mottled
look and has some color ranging in it so that it doesn’t provide
a
background for dirt and smudges to show and require attention.
|
 |
|